Open the SolisCloud account for the system
Use the account that owns or manages the inverter at this home. If the installer created it, ask them to confirm that your account can see the plant.
Solar and battery · Aveum setup guide
Prepare your SolisCloud system details
Check the right plant and inverter are visible in SolisCloud before connecting a supported system.
Integration in progressConnection route: Subject to provider approval
The quick checklist
- 1Sign in to the SolisCloud account for this home.
- 2Check the plant is online and showing recent readings.
- 3Record the plant name, property and inverter serial.
- 4Keep any existing connection in place.
- 5Wait for Aveum’s approved route before entering credentials.
Before you begin
Solis connection work is in progress. These checks help confirm your system is ready; they do not start an Aveum connection.
Step-by-step
Check the plant is reporting
Confirm the plant appears online and has recent generation or battery readings. If readings are stale, resolve that in SolisCloud before using another service.
Identify the correct plant and inverter
If the account contains multiple properties, note the plant name, site address and inverter serial number for the home you mean to connect.
Understand the two access methods
Some services use a SolisCloud sign-in and approval screen; others request API credentials. These are separate routes. Aveum has not yet confirmed which route will be available for your system, so do not start either flow on Aveum’s behalf.
Locate API Management only if you already have approval
If Solis has granted your account API access, SolisCloud may show an API Management area where a Key ID and Key Secret can be issued. Access can depend on your account and provider approval. Do not request or create credentials solely to prepare for Aveum.
Keep the current system stable
If another service already connects to SolisCloud or uses its API, leave that working setup in place. Record which plant and service are involved before making changes, and never share a Key Secret in screenshots or regular support messages.
What a confirmed connection means
A setup can pass through several checks. One successful step does not automatically confirm every other part.
- SolisCloud shows the correct plant and inverter for this home.
- Recent readings appear in SolisCloud, so the logger and inverter are reporting.
- Aveum can only confirm a connection after an approved route is available and it verifies the correct plant and fresh data. A successful sign-in or API key alone would not prove telemetry is current.
Troubleshooting
I cannot see the plant in SolisCloud
Check that you signed in with the account that owns or manages the installation. If an installer set it up, ask them to confirm the plant has been shared with your account.
The plant is listed but readings are old
Check the data logger’s network connection and the inverter’s status in SolisCloud. Resolve stale readings with the installer or Solis support before treating another connection as active.
Several plants appear in my account
Use the site address, plant name and inverter serial to identify the correct property. Do not choose a plant based only on a similar name.
I do not see API Management
API access may depend on account permissions or provider approval. Aveum does not currently require you to enable it; do not create credentials in anticipation of a connection.
Common questions
Can I connect SolisCloud to Aveum today?
The registry currently shows Integration in progress. The guide is preparation only; Aveum has not opened a general Solis sign-in or API connection flow.
Should I choose sign-in or an API key?
There is no Aveum setup choice to make yet. Keep your existing SolisCloud setup in place and follow the connection method Aveum publishes when this integration is ready.
What are a Key ID and Key Secret?
They are API credentials created in SolisCloud when API access is enabled for an account. A Key Secret should be treated like a password. Aveum does not currently ask you to provide either value.
What if API Management is missing?
Your account may not have the required access or approval. Ask the account owner or installer to check permissions, or contact Solis through its normal support route. This does not prevent you from using SolisCloud itself.
Does a valid login mean my inverter is connected?
No. Account access, selecting the correct plant, receiving recent readings and enabling any supported feature are separate checks.
Will connecting monitoring let Aveum control my battery?
No. Monitoring access does not automatically provide control. Any future feature would depend on the verified model, permissions and the capability Aveum explicitly makes available.